Daily Maintenance of Digital Sublimation Printer in Summer

Now the weather is getting hotter and hotter, the temperature is getting higher and higher day by day, in such weather, do you know how to do the maintenance of the digital sublimation printer?

The digital sublimation printer has certain requirements on the temperature and humidity of the production environment. If it is in a high temperature or humid environment for a long time, some parts inside the digital sublimation printer will be damaged, and it will also have a great impact on the printing quality of the product. In addition, in summer, not only the temperature is high, but also rainfall is frequent, and the climate is relatively humid, and often work in such an environment. If you do not pay attention to daily maintenance, the machine is prone to failure.

Therefore, in summer, be sure to maintain the Fedar digital sublimation printer.

Daily maintenance of Fedar digital sublimation printer

The indoor temperature of Feidi digital sublimation printer operation is between 18-30 degrees. In the environment of high temperature of 35 degrees, it is necessary to cool down by fans or air conditioners. In this way, not only the life of the digital sublimation printer is good, but also the quality of the product is guaranteed.

Drying is not necessarily high temperature, but high temperature generally causes drying, so during the high temperature in summer, we must pay attention to anti-static and anti-dry ink. At this time, you can often sprinkle some water on the ground to help prevent the indoor air from being too dry, and at the same time prevent static electricity for the ground wire of thesublimation prineter.

When it is rainy in summer, the wet weather will affect the normal use of the digital sublimation printer. It is recommended to use a dehumidifier to dehumidify. At the same time, the main body of the Fedar digital sublimation printer should be well covered to avoid damp air from invading related circuit boards and components.

The southern summer is not only hot, but also rainy. If the humidity is too high, it will affect the drying speed of the picture. In order to avoid the printing ink sticking together during winding, if possible, it is recommended to equip the processing workshop of the digital sublimation printer with an exhaust fan, and install an air conditioner to start dehumidification. Mode is also possible, but the effect is more general. If the humidity is serious, it is recommended to install a dehumidifier.

Fedar Printer focuses on DTF Printer, Sublimation Printer and Textile Printer (https://www.tex-printer.com/) more than 15 years. Fedar is a Professional Manufacture of Printers in China.

At present, Fedar products have been sold to all over the world, including U.S.A., Canada, Germany, Poland, Brazil, Peru, Australia, Russia, Singapore, South Africa, India, Thailand, Philippines, Pakistan and other more than 30 countries.